Differences

This shows you the differences between two versions of the page.

--- succourtechnics [2018/06/07 10:04] – givanbela
+++ succourtechnics [2018/08/23 11:03] (current) – givanbela
@@ Line 1: / Line 1: @@
+// The setup would be a combination of 2 different units, set up across the BBQ area at Tempelhof. Each unit would fit in with the BBQ and radio sets around, adding some live musicians on the spot(s)... For the plan or scores read the [[SuccourScore0 | score idea section]]. //
-//Lately our mood turned into a quick live setup in the middle of the BBQ area with self-built devices: 4 split-stereo channels transmitted by 4 raspberry pi radio transmitters, received on 8 portable radios, mobile phones, tablets, ... It is all working easily on usb-batteries with(out) a solar panel. A piece for green low voltage power and live musicians: let's go to Tempelhof and just play it! But how how how?//
+====== Vitrine/BBQ Interactives ======
+  * Raspberry Pi 2 or 3 with soundcard in/out and some sensors
+  * BME680 = temperature, pressure, humidity, air quality sensor
+  * PM2.5 Air Quality Sensor
+  * enviro pHAT
+  * mpr121 capacitive/touch sensor (12)
+  * 3D tracking and gesture, RGB sensors
+  * software: python, puredata
+  * lcd displej and a bluetooth reproduktor
+  * A111 Pulsed Radar Sensor
+====== Walking Synthesis ======
+  * Teensy + Prop shield (6DOF + 2 watt amp)
+  * all weather speaker 2-4 watt
+  * the megaphones (sd-card, record/loop, voice, aux)
 ====== SDR = software defined radio ======
+//Lately our mood turned into a quick live setup in the middle of the BBQ area with self-built devices: 4 split-stereo channels transmitted by 4 raspberry pi radio transmitters, received on 8 portable radios, mobile phones, tablets, ... It is all working easily on usb-batteries with(out) a solar panel. A piece for green low voltage power and live musicians: let's go to Tempelhof and just play it! But how how how?//
   * https://howtoraspberrypi.com/create-radio-transmitter-raspberry-pi/
@@ Line 21: / Line 44: @@
   * https://www.rtl-sdr.com/a-pocket-datv-transmitter-and-receiver-with-raspberry-pi-limesdr-mini-and-rtl-sdr/
   * https://www.rtl-sdr.com/transmitting-dvbt-hdtv-raspberry-pi-rtl2832u/
-====== Vitrine Interactives ======
-  * Raspberry Pi 2 or 3 with some sensors
-  * BME680 = temperature, pressure, humidity, air quality sensor
-  * PM2.5 Air Quality Sensor
-  * enviro pHAT
-  * mpr121 capacitive/touch sensor (12)
-  * software: python, puredata
-  * lcd displej and a bluetooth reproduktor
-====== Walking Synthesis ======
-  * Teensy + Prop shield (6DOF + 2 watt amp)
-  * all weather speaker 2-4 watt
-  * the megaphones (sd-card, record/loop, voice, aux)